Skip to content

How to Get a Product Made in China from a Sample

Have a sample and want a factory to make a batch? Start with a few photos and a short brief. These four steps will help you tell factories what to make, compare first-order costs, and decide when production can start.

1. Show the factory what needs to match

Give your reference sample an ID. Take close-up photos of the key features and mark each photo with that ID. Share only drawings and photos you have permission to use.

  • Mark the dimensions and finishes that need to match, and where the part must fit with other components.
  • Say what can change and who can approve a change.
  • If you’re unsure about the material or a measurement, ask how the factory would check it and who would pay.

In one exhaust project, the buyer wanted to keep the look of the welds. Polishing away the visible weld marks would have changed the finish. YSIS Buy laid out the options and coordinated the agreed work with the manufacturing partner once the buyer chose an approach. Read the exhaust project case study.

2. Send both factories the same brief

Send both factories the same version of your brief. Include the order quantity, currency, packing requirements, and delivery location. Ask each factory to write down any assumptions behind its quote.

If one quote includes delivery to your warehouse and the other is for pickup at the factory, ask both factories to quote to the same location before you compare.

3. Compare the total cost of the first order

Add up the cost of the units and any separate charges for samples, tooling, inspection, packing, and shipping. Subtract any confirmed credit that applies to this order. Count each charge once. Enter 0 when the supplier confirms a charge is included or waived. Leave unknown charges blank until the supplier confirms them in writing.

Example for a 200-unit order

Both quotes are in US dollars and use the same delivery terms. Each supplier charges $100 for samples. In this example, no other charges or credits apply.

  • Supplier A charges $8 per unit and $600 for tooling. The first order totals $2,300.
  • Supplier B charges $9 per unit and $200 for tooling. The first order totals $2,100.

Supplier B’s tooling costs $400 less. That puts its first-order total $200 below Supplier A’s.

Enter your order details once, then add both quotes. Open the “Worked example” tab to see a completed comparison. Excel shows each first-order total when that quote is complete and the difference when both are ready.

Download the quote comparison worksheet (Excel)

4. Approve the sample and agree on what to check

Before production starts, record the approved sample ID, the spec revision, and any exceptions you both agreed to. Write down who can give the factory the go-ahead, then agree on the following.

  • What will you check during inspection? How will you record anything that differs from the specs, and who can accept it or ask for rework?
  • Who owns the tooling? What happens if the sample needs another revision?
  • When does production lead time start? Is the quoted date for shipment or delivery?

For help checking what’s feasible or deciding who handles sampling and production, see custom manufacturing coordination. If you’re sourcing an exhaust component, the motorcycle exhaust RFQ checklist covers the model details, drawings, and parts to include in your request.

Back to Guides & Resources